General Questions

Ive got 2 motors that I believe the bells are bent. Looking at them they look fine. I had a hard crash into asphault and the # 3 & #4 motors sound like gears grinding when I try to spin them up. I tried to take one of the bells off and stripped the allen bolt out…. Any ideas on how to get the bolt o

Ah man rainy for a month. The sim is old and I am anxious. Bout to snap. Uuuuggg

This might be a strange question but is MG Chemicals silicone modified conformal coating conductive while wet? i want to conformal coat a small usb charger/powerbank but everything is already soldered and active (see photo) so I wonder if I will break it if I coat it like this. should I first unso

I went home and got my DJI Spark and flew over the area where it went down. Does anyone know a good app that i can use to basically not go over the same area more than once while looking for it??

Hey yall I'm doing OK with getting in stick time and each flight feels like progress, I only started properly in January and it's been wild. But I'm struggling with Power loops, especially precision ones, what tips can you give me? To help me practise and improve. Thanks

Annnnd the second prop question of the hour I've got myself a 3" iflight h3 titan, wonderful quad and need to pick up a handful of spare props,what's the best ones for freestyle?

If I crash (when) and I don't manually stop the recoding on the Betafpv SMO, the footage will stay on the card but become corrupt and unusable Is there anything I can add to make sure in the even of a crash, the footage is saved? Thanks

Anyone know if it's possible to fit a standard 39*30 stack into a protek 35 frame? Thanks

What are your thoughts about race wire..? I was considering using it in my next two builds for the ease of repairs and replacement, but i wondered if arms start snapping, woud there be any added bebefit with possibly not yaking wires from the esc or motor..?

I was out flying this afternoon with my nazgul5 v2, I kept getting break up in my video feed, it was fine at further distance but when I was closer it was all most like the video was doing a rolling feed and would crash and refresh. Does anyone have any ideas

so just wanted to start a discussion on props. What are your go to 5" freestyle props for 6s yes p3s PB and Js are great and I love them.as well as the S4 lemon limes Recently tried the gemfan hurricane 51477 jb joints. Not bad not bad at all. I mean I tossed em on some 1850 kv motors so

Recommendations for a 5inch Racing Frame? Never raced before but looking to get into it, currently I fly more cinematic. Thanks for the help! 😊

Hi, I managed to break the antenna SMA cable (I think that's the name!) On my quad and not sure what cable I should get to replace it. Can anyone help? I fly the Helifar Fuuton 2! Many thanks

I was trying to figure out how to go about using specific software to use gyro data thiscway you can run virtually any flight video through rsg. I was hoping some of you may be able to clarify the process of this. Im using my hero 8 for this right now for smooth video but as a new dji pilot, id like

Hey all! I was out doing some tuning this morning and on a whim checked the capacitor for the first time and found it was surprisingly hot. Not burning/scalding hot, but not too far off. I understand it's caused by noise in the system, and this definitely isn't the cleanest quad out there, but there

So I build a 3 inch with darwin fpv 30amp stack but I noticed that it immediately says 29... something amps (in osd ) when I plug it in. Did I click something wrong or is something wrong. my 5 inch only reads 2-3 amps while flying lol

Went out today and first pack I smashed my ft5. Can't find replacement parts at the moment. What do u guys think about moving everything to a source one v4?

What the... So yesterday I went out to fly around with Spark1 and ZombieDan. Dan hasn't flown in over a year, and Sparky had 3 new Crossfire builds, his first Crossfire builds, to maiden. Those 3 birds were set to go. Arming just fine. On build #1, he had missed a motor direction reversal on m

Are these motors inherently weak? My bumblebee keeps them. Out of dozens of motors I've used over the years...1407's seem to fail the most. Are these inherently weak? I used cli and adjustments to put rate profile on switch to effectively switch between 2800kv and 2100ish kv so in a jam I can sl

I work every other weekend so having my weekend off is something I look forward to. Weather apps said no rain until late this afternoon, charged 12 batteries up for the 5inch quads, 16 for little 3inch and 2inch quads. Got to my location, loads of people moved to a quiet spot where I could hit some

Is it possible to brick a set of esc's in a hard crash? If so, is it possible to get them working again? I've got one out of 3 working, but that one I replaced because the motor didn't spin freely. Thought the others were fine, but no tones from them. When I arm the only motor that spins is the one

So I pulled the trigger on a 6s Taycan Flew it today and was really impressed at the potential But damnnnnnn its loud, are there any props that offer less of a din?

Has anybody else experienced loose or shifted arms after very soft bumps and crash landings?

I've got 5 x 5 inch quads and a 3inch on the way. I've got a real hankering for a cinewhoop but would I genuinely use it? I can get pretty nice cinematic stuff from the 5" and it wouldn't be used for anything like indoor stuff or commercial stuff. Waddya think

So I broke another arm. No big deal, I have extra arms.... The motor feels a little rough and hard to spin, too easy I got one of those too. The motor wire ripped the pad off the esc? .......F#$&! That’s gonna be a whole rebuild. Have you guys ever had this issue? I noticed HeadsUp is using MR30 co

Lots of people asking about airtags and locating drones. Sure it will work if walk within range of your tag. Why not use the tools you already have? You only need an opentx radio and a cheap flywoo gps and that's it. You can log your gps to your radio. It's super easy and you don't have to pace

I'm stuck between and caddx turtle 2 or a runcam split 3 lite. I'm leaning towards the runcam. Thoughts?

Im having a problem with one of my quads and my Roll to the Right is the only thing affected. Its delayed by 2-3 seconds and this is the 3rd time it’s happened to me. I have a DalRC F405 Fc with a DalRC F40 ESC (4in1) FRSKY R-XSR receiver with a Panda RC vtx. The last time I took it home plugged in